MENSI 5/8-18UNF Male Flare Propane Gas Fire Pit & Heater Fireplace Main Control Valve Low Pressure with Flame Failure Safety Low Pressure Thermoelectric Valve NOT Universal Without Pilot Port

Valve Entrance & Exit with 3/8" Male Flare Thread Working Pressure: 1/2"PSI (65Mbar Max) Operation Instructions 1). Fix the valve on a plate or board of your grill or fire pit by the head screw and flange. 2). Connect your inlet and outlet hose on inlet and outlet side. (faston it tightly enough in case of gas leakage) 3). Faston the thermocouple nut M8 on the valve end tightly (Check if your valve end thread if 8mm before you buy) 4). Connect thermocouple and end thread well 5). Open gas by correct size knob and push your valve around 5-10s till the thermocouple head is heated enough. 6). Release your hand and it work properly If when you release hand, gas valve shut off again, Please check a. If your thermocouple is always be heated on flame b. If the thermocouple end is well connect with valve c. If the inlet and outlet side well connect with hose you have ！！！ The valve max working pressure 1/2 PSI, it is only for flame failure safety designed fire pit. NOT suitable for Natural gas. The valve is not include Pilot connection, Just inlet and outlet, compare your design before ordering!

• For Low Working Pressure Max 1/2 PSI , CE&CSA Certified Main Control Valve Inlet & Outlet with 3/8" Male Flare Not Universal Valve （ONLY VALVE NOT INCLUDE THERMOCOUPLE）
• Valve Spindle "D" Shaft for 6mm Knob,With M15 Nut to Fix on your Panel Plate
• Suitable for Low Pressure Repair Control System for Grill, Fire Pit, Fireplace & Heater (Max BTU rating: 50000)
• Made of Brass more Durable Can connect Standard DN10 corrugated flex line and 3/8" Female regulator hose directly by hands
• Thermoelectric Valve is a low pressure valve rated around 50000BTU need to work with thermocoupler, Please confirm your system before order to avoid return